1. Hernandez, E.M. “Minimal Arias intensity modification of ground motions to achieve extreme structural response” Journal of Earthquake Engineering and Structural Dynamics [Link]
  2. Filizadeh, R., Hernandez, E.M., Rosowsky, D. (2024) “Risk-based framework for post-earthquake monitoring and evaluation of reinforced concrete bridge subject to multiple hazards” Reliability Engineering and System Safety [Link]
  3. Hernandez, E.M. and Erazo, K (2023) “Lower bound of structural damage to achieve practical identifiability of nonlinear models in seismic structural health monitoring” Journal Earthquake Engineering and Structural Dynamics [Link]
  4. Sullivan, J.L., Novak, D.,Hernandez, E.M., Van Den Berg, N. (2023) “A new quality measure for acceptance and payment with a QC/QA performance specification using Bayesian updating” International Journal of Quality & Reliability Management [Link]
  5. Filizadeh, R., Hernandez, E.M., Rosowsky, D. (2023) “Time-Dependent Damage Evolution of Reinforced Concrete Bridge Piers: Implications for Multihazard Analysis” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A [Link]
  6. Smith, C.B. and Hernandez, E.M. (2022) “Identifying local reductions to mass and stiffness with incomplete modal information. Sparsity and non-negative constraints” ASCE Journal of Engineering Mechanics [Link]

  7. Lens, J., Dewoolkar, M., Hernandez, E.M. (2021) “System-wide seismic vulnerability of aging multiple-span multiple-girder bridges in low-to-moderate seismic hazard regions” Earthquake Spectra [Link]

  8. Roohi, M., Hernandez, E.M., and Rosowsky, D. (2021) “Reconstructing element-by-element hysteretic dissipated energy in instrumented buildings: application to the Van Nuys hotel testbed” ASCE Journal of Engineering Mechanics [Link]
  9. LeBlanc, B., Hernandez, E.M., McGinnis, R., and Gurchiek, R.D. (2021) “Continuous estimation of ground reaction force during long-distance running within a fatigue  monitoring framework: A Kalman filter-based model-data fusion approach” Journal of Biomechanics [Link]
  10. Roohi, M., and Hernandez, E.M. (2020) “Post-earthquake performance-based decision making for instrumented buildings” Journal of Civil Structural Health Monitoring [Link]
  11. Smith, C. and Hernandez, E.M. (2020) “Non-negative and sparsity constrained inverse problems in damage identification–Application to a full-scale 3D truss” Journal of Mechanical Systems and Signal Processing [Link]
  12. Roohi, M., Erazo, K., Rosowsky D. and Hernandez, E.M. (2020) “An extended model-based observer for state estimation in non-linear hysteretic structural systems” Journal of Mechanical Systems and Signal Processing [Link]
  13. Clarfeld, L., Hines, P., Hernandez, E.M. and Eppstein, M. (2019) “Risk of cascading blackouts given correlated component outages” IEEE Transactions on Network Science and Engineering [Link]
  14. Smith, C.B. and Hernandez, E.M.  (2019) “Non-negative Constrained Inverse Eigenvalue Problems – Application to  Damage Identification” Journal of Mechanical Systems and Signal Processing [Link]
  15. Roohi, M., Hernandez, E.M. and Rosowsky, D.V. (2019) “Nonlinear seismic response reconstruction and performance assessment of instrumented wood-frame buildings – validation using the NEESWood capstone full-scale tests”  Journal of Structural Health Monitoring and Control [Link]
  16. Hernandez, E.M. (2019) “Sensor placement for robust state estimation in structural dynamics” Journal of Mechanical Systems and Signal Processing 128, 318-328 [Link]
  17. Roohi, M., Hernandez, E.M. and Rosowsky, D.V. (2018) “Estimation of element-by-element demand-to-capacity ratios in instrumented SMRF buildings using measured seismic response” Journal Earthquake Engineering and Structural Dynamics [Link]
  18. Smith, C.B., and Hernandez, E.M. (2018) “Detection of spatially sparse damage using impulse response sensitivity and LASSO regularization” Journal of Inverse Problems in Science and Engineering [Link]
  19. Hernandez, E.M. (2017) “Efficient sensor placement for state estimation in structural dynamics” Journal of Mechanical Systems and Signal Processing 85(15):789-800 [Link]
  20. Polanco, N., May, G. and Hernandez, E.M. (2016) “Finite element model updating of semi-composite bridge decks using operational acceleration measurements”Journal of Engineering Structures 126(1): 264-277 [Link]
  21. Erazo, K., Hernandez, E.M. (2016) “High-resolution seismic monitoring of instrumented buildings using model-based state observers” Journal of Earthquake Engineering and Structural Dynamics 45 (15), 2513-2531[Link]
  22. Hernandez, E.M. (2016) “Identification of localized structural damage from highly incomplete modal information: theory and experiments” ASCE Journal of Engineering Mechanics 142(2) [Link]
  23. Hernandez, E.M. and Polanco, N.R. (2016) “A lower bound for the variance of frequency and damping ratio identified from noisy vibration measurements” Journal of Structural Control and Health Monitoring 23(1):5-19 [Link]
  24. Erazo, K. and Hernandez, E.M. (2016) “A mechanistic approach to post-earthquake damage assessment of instrumented structures with uncertain input” ASCE Journal of Engineering Mechanics 142(9) [Link]
  25. Erazo, K. and Hernandez, E.M. (2015) “Uncertainty quantification of state estimation in nonlinear structural systems with application to seismic response in buildings” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems. SPECIAL ISSUE:  Uncertainty Quantification and Propagation in Structural Systems 2(3): 17pp  [Link]
  26. Hernandez, E.M. (2014) “Identification of isolated structural damage from incomplete spectrum information using l1-norm minimization” Mechanical Systems and Signal Processing 46(1):59-69 [Link]
  27. Erazo, K. and Hernandez, E.M. (2014) “A model-based observer for state and stress estimation in structural and mechanical systems: experimental validation” Mechanical Systems and Signal Processing 43(1):141-152 [Link]
  28. Hernandez, E.M. and May, G. (2013) “The dissipated energy ratio as tool for earthquake induced damage detection and classification of instrumented structures” ASCE Journal of Engineering Mechanics 139(11), 1521–1529 [Link]
  29. Hernandez, E.M. (2013) “Optimal model based state estimation in mechanical and structural systems”, Journal of Structural Control and Health Monitoring 20(4):532-543 [Link]
  30. Hernandez, E.M. and Bernal, D. (2013) “Iterative finite element model updating in the time domain” Journal of Mechanical Systems and Signal Processing (34)1-2:39-46 [Link]
  31. Hernandez, E.M., Bernal, D. and Caracoglia, L. (2013) “On-line monitoring of wind induced stresses and fatigue damage in structures” Journal of Structural Control and Health Monitoring 20(10):1291-1302 [Link]
  32. Hernandez, E.M. (2011) “A natural observer for optimal state estimation in second order linear structural systems” Journal of Mechanical Systems and Signal Processing (25)8:2938-2947 [Link]
  33. Hernandez, E.M. and Bernal, D. (2008) “State estimation in structural systems with uncertain stiffness and damping matrices” ASCE Journal of Engineering Mechanics (134)3:252-258 [Link]
  34. Bernal, D. and Hernandez, E. (2006) “A data-driven methodology for assessing the impact of earthquakes on the health of building structural systems” The Structural Design of Tall and Special Buildings (15)1:21-34 [Link]